Видео

Super cool. I kind of want one, but there are other things that need those $10000 smackers right now. In other news, I had a lot of trouble with TPU on the stock AB/CW1, but it turns out that somewhere along the line one of the little bearings fell out of the extruder, so it was flapping around a bit too much for the Polymaker TPU-90.

Can you cut in 4D with rotary system into the liquid base.. eg cut micro gears!,

Thank you sir for doing a rundown on the CAN bus system. I have been string to wrap my head around it. This really helped and Thank you for that.

Very honest review gained a sub

Will this process work to get full klipper on the Sonic Pad?

If they releasing that easy id prob make the gap a little tighter. Its not that this is especially bad but with supports you lose precision the larger the gap you use. It makes the supports easier to remove but you get a better more accurate finish the closer they are. Hence why he has strings on bridges, ganted they can be pretty hard to avoid but with supports it shouldnt be an issue.

well god dam thats sick AF. Need me a 10k printer that can do phly ish like that for me.

Guide please!!! 🙏🙏🙏

do you have a polymaker affiliate link for the Canadian website, because i want to use your code but am in Canada

Now you tell me. Ugh😢

Missed this due to timezone and need to sleep issues. For the positron having a part break in shipping for a printer designed to be folded up a taken places doesn't sound like a good start.

Unfortunately I missed the stream, but thank you so much for showing and recommending my channels in stream! Makes me very happy and helps a lot pushing the channel. PePe

can I use these carbon fiber gantry parts on the trident ?

Hate these videos. I'm occasional user of 3d printer. I have old anycubic vyper, i am pretty technical, never had huge drama while printing, but never dialed printer to points like this. Even at slow speeds. Print mostly petg with 0.6 nozzle. And looking even on elegoo neptune 4 series, where 400euro device prints fast and pretty accurate kinda make me wanna buy new printer... But deep inside i know for sure, that prints wont look like this. And sorry but pla is only for decorations and after having enough statues in home, you realise that the times you will print somehing, part must be functional.

Hi there! i Followed your tutorial step by step, even used the exact same breakout board that you used. But when i plugged in usb c after everything it didnt work. what can i troubleshoot to get this going?

FFS why do people print in clown colors when the part should obviously be black or gray.

Guys is petg good enough or is petg just a better quality demo filament. I"m finding it hard to pick between petg and abs for projects. When do you use petg and wjen you use abs. Or do you use abs if you can at all times? I figurd you use pla for everything and than when you want to sell something or make something durable you make it in abs. But when so you use petg than?

what slicer setting did you use for the purge tower height to be different from the print?

Soo. Why would my friends want to smell that stink. Oh wait, I don't have friends

Having supports remove easily should be expected but having the part look like it turned out is amazing!

Canuck, you got some splainin' to do! How's about a new video?

MHHMMMMMM YUMMY

6:54 sounded like Jeremy Clarkson lol. Thanks for this recap, wish I could have gone :)

Niceeee

IME this only happens if your temperature is low enough that you're getting suboptimal bonding on layers that actually are supposed to bond.

But how?!?!?!

Neroooooooo how can you mention pet-cf and not annealing 😭 When annealed, it's heat resistance is SIGNIFICANTLY better than abs. I've been able to print in a 120C chamber with its better brother, PET-GF annealed

Please put the camera down...your giving me motion sickness.

Is it that loud or does it just appear louder through the camera?

All my pa6-cf prints are brittle and not as good as nylon. Wonder if it’s just my printer or is this stuff just not as good as people say

I have some cf-tpu and it is glorious.

People will be like “but it isn’t as fast as my Bambu printer why would I buy this” bro do you even KNOW how expensive things like ball screws are. This thing is the gap between buying a nice gaming PC and buying a $10000 productivity workhorse PC for video editing and such. It is just a whole different class of performance but for a totally different purpose.

Well, at least you're streaming something affordable.

Best 3DP channel hands down 👌

Sweet little machine. Made in canada.

Huh kinda cool. It would be easy to add auxiliary fans to the lower plastic housing at least. Fun stuff.

Could this do PET1 plastic?

Micron is awesome 👍‼️ But you got me with what you said: Pewpew makes Brrrr!! AWESOME!!

Micronics is cool, I saw you took a big look at the voron parts

at this size wouldn't it make more sense to move the bed rather than the hotend?

Can be much easily handled by just buying a cheap charge cable . Risk free. There are also two charge contact metal , you can easily design a charge dock using any usb port type. I made one.

Off the shelf parts....Except for some eletronics parts ,pcb, like x y endstops, maybe also inside print head gantry too? ( forgot whats in stock design, everyone now uses special toolhead pcb, can bus etc)

I hope Micronics is successful and they work out all the little issues.

cool let me know when its under 1000

RIP I wouldn't call this sls if it can't do metal.

Hey when are you going to make part 2 of the power armor?

Whether this happens is highly dependent on geometry and what forces are on the parts while they're hot. Decorative items where the extrusion lines ("grain") aren't largely all parallel are fine on a hot black dash 365 days a year. The gears in the drag racer look fine too. It's the thin flat body structures, which look like they were holding the entire weight while hot, that failed.

Would it be possible to use a smartphone accelerometer? If you connected to the web server from your phone and then attached your phone to the printer could you get the phone to send its sensor readings to the webpage.